In-situ　MgB2/Fe　tapes　were　fabricated　by　powder-in-tube　(PIT)　technology　using　Mg　and　B　powders.　The　tapes　were　sintered　by　advanced　spark　plasma　sintering　(SPS)　technique.　The　effects　of　the　annealing　parameters　on　the　properties　of　the　MgB2　tapes　were　investigated　by　the　analysis　of　XRD,　SEM　and　the　magnetic　J(c)　measurements.　It　was　shown　that　at　10　K,　0　T,　the　J(c)　value　of　the　tape　sintered　using　SPS　machine　at　800　degrees　C　for　15　min　under　40　MPa　was　close　to　106　A/cm(2),　which　was　higher　than　that　of　the　same　tapes　annealed　by　conventional　method.　It　was　supposed　that　the　density　and　the　homogeneity　of　the　MgB2　core　were　strongly　improved　using　fast　SPS　sintering　process.　Further　enhancement　of　J(c)　in　the　tapes　is　expected　for　the　understanding　of　the　SPS　sintering　mechanism.　(c)　2007　Elsevier　B.V.　All　rights　reserved.