Heat transfer characteristics of flat micro-heat pipe array - 文章详情页

作者：

Zhao, Yaohua (Zhao, Yaohua.) (学者：赵耀华) | Wang, Hongyan (Wang, Hongyan.) | Diao, Yanhua (Diao, Yanhua.) | Wang, Xinyue (Wang, Xinyue.) | Deng, Yuechao (Deng, Yuechao.)

收录：

EI Scopus PKU CSCD

摘要：

Various　flat　micro-heat　pipe　arrays　with　miniature　axially　grooves　for　electric　chip　cooling　are　constructed.　A　series　of　experiments　including　start-up　time,　temperature　distribution　and　heat　flux　with　different　working　fluids　and　filling　factors　are　carried　out.　The　result　shows　that　flat　micro-heat　pipe　arrays　have　advantages　of　quicker　start-up,　less　temperature　difference　and　better　heat　transfer.　R141b,　acetone,　methanol　and　ethanol　are　used　as　working　fluids.　Flat　micro-heat　pipe　arrays　filled　with　methanol　have　the　best　heat　transfer　performance.　The　maximum　heat　flux　can　reach　102　W　·　cm-2　while　the　chip　is　maintained　at　its　working　temperature,　below　70°C.　The　best　filling　factor　of　methanol　is　0.3　for　high　heat　flux.　©　All　Rights　Reserved.

关键词：

Acetone Capillary flow Fluids Heat flux Heat pipes Heat transfer performance Methanol Thermal management (electronics)

作者机构：

[ 1 ] [Zhao, Yaohua]College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100022, China
[ 2 ] [Wang, Hongyan]College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100022, China
[ 3 ] [Diao, Yanhua]College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100022, China
[ 4 ] [Wang, Xinyue]College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100022, China
[ 5 ] [Deng, Yuechao]College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100022, China

通讯作者信息：

电子邮件地址：

yhzhao@bjut.edu.cn

查看成果更多字段

成果类型
所属机构

所有年份指定年份从至