Study and fabrication of a novel AlGaInP light emitting diode with omni-directional reflector - 文章详情页

作者：

收录：

EI Scopus PKU CSCD

摘要：

A　novel　AlGaInP　light　emitting　diode　(LED)　with　omni-directional　reflector　which　can　increase　the　external　quantum　efficiency　was　introduced.　This　reflector　that　was　realized　by　the　combination　of　a　dielectric　SiO2　layer　and　Au　layer　was　first　fabricated　to　the　p-type　contact　of　the　LED.　The　LED　p-type　contact　layers　were　then　bonded　to　the　solder　coated　GaAs　submount,　and　the　GaAs　substrate　was　renewed　by　wet　chemical　etching　and　mechanical　polish.　The　light　is　emitted　from　n-type　contact　layers　into　tre　medium　surrounding　the　chip.　The　characteristics　of　the　novel　AlGaInP　LED　are　presented　and　compared　with　the　conventional　AlGaInP　LED.　It　is　shown　that　the　luminous　intensity　of　the　novel　AlGaInP　LED　at　forward　current　of　20　mA　is　3　times　higher　than　that　of　the　conventional　AlGaInP　LED.

关键词：

Semiconducting aluminum compounds Etching Fabrication Quantum efficiency Light emitting diodes

作者机构：

[ 1 ] [Zou, De-Shu]Beijing Optoelectronic Technology Laboratory, Beijing University of Technology, Beijing 100022, China
[ 2 ] [Zhang, Jian-Ming]Beijing Optoelectronic Technology Laboratory, Beijing University of Technology, Beijing 100022, China
[ 3 ] [Liu, Si-Nan]Beijing Optoelectronic Technology Laboratory, Beijing University of Technology, Beijing 100022, China
[ 4 ] [Xu, Chen]Beijing Optoelectronic Technology Laboratory, Beijing University of Technology, Beijing 100022, China
[ 5 ] [Zhu, Yan-Xu]Beijing Optoelectronic Technology Laboratory, Beijing University of Technology, Beijing 100022, China
[ 6 ] [Shen, Guang-Di]Beijing Optoelectronic Technology Laboratory, Beijing University of Technology, Beijing 100022, China

通讯作者信息：

电子邮件地址：

查看成果更多字段

成果类型
所属机构

所有年份指定年份从至