Research on precision mirror machining technology for W-Mo alloy - 文章详情页

作者：

Jialiang, G. (Jialiang, G..) | Xiaohua, X. (Xiaohua, X..) | Yancai, W. (Yancai, W..) | Zhijie, S. (Zhijie, S..) | Xingjun, S. (Xingjun, S..)

收录：

Scopus PKU

摘要：

In　order　to　find　a　new　way　for　mirror　precision　machining　of　W-Mo　alloy,　precision　grinding　and　ultra　precision　lapping　experiments　were　conducted　using　electrolytic　in-process　dressing　(ELID)　technique.　The　generating　mechanism　of　the　mirror　precision　grinding　of　W-Mo　alloy　was　analyzed.　A　surface　roughness　of　Ra　0.020μm　was　obtained　after　ELID　precision　grinding.　Then,　at　the　optimized　parameters　such　as　lapping　pressure　0.1∼0.3　N/cm2　and　rotational　speed　60∼100　r/min,　a　mirror　precision　surface　roughness　of　Ra　0.012μm　was　achieved.　The　results　proved　that　ELID　technique　guaranteed　the　machined　surface　quality,　and　the　lapping　pressure　as　well　as　the　rotational　speed　were　the　main　influencing　factors　during　ultra　precision　lapping.

关键词：

EFID grinding; Precision lapping and polishing; Surface roughness; W-Mo alloy

作者机构：

[ 1 ] [Jialiang, G.]College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
[ 2 ] [Xiaohua, X.]College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
[ 3 ] [Yancai, W.]College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
[ 4 ] [Zhijie, S.]College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
[ 5 ] [Xingjun, S.]Institute of Mechanical Manufacturing Technology, CAEP, Mianyang 621900, China

通讯作者信息：

[Jialiang, G.]College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China

电子邮件地址：

bj1140@163.com

查看成果更多字段

成果类型
所属机构

所有年份指定年份从至