收录:
摘要:
Commercially pure titanium was selected to be a model material. Commercially pure titanium plates with different types of dislocation boundaries were prepared by multi-pass cold rolling. As-impacted titanium samples were obtained by a split Hopkinson pressure bar, and the evolution of dislocation boundary was characterized through transmission electron microscopy. The high-speed deformation response of dislocation boundaries in the commercially pure titanium was launched. Results show that the initial dislocation boundary becomes a major obstacle to dislocation slipping under high-speed compression at the strain rate of 1000 s(-1). Plates with geometrically necessary boundaries at the spacing of 0.5 mu m can generate new dislocation boundaries intersected with the initial ones after high-speed deformation. When the spacing of geometrically necessary boundaries is below 0.3 mu m, the dislocation groups form among them. As the spacing of geometrically necessary boundaries declines to 0.1 mu m or below, the localized microstructure mode is bending of initial boundary and dislocation groups. There are only dislocation groups and sub-grain in the highly localized zone.
关键词:
通讯作者信息:
电子邮件地址:
来源 :
RARE METAL MATERIALS AND ENGINEERING
ISSN: 1002-185X
年份: 2017
期: 5
卷: 46
页码: 1380-1386
0 . 7 0 0
JCR@2022
ESI学科: MATERIALS SCIENCE;
ESI高被引阀值:169
中科院分区:4