Microstructure and Fine Structure in Fusion Zone of Welded Joint for High Strength Fine Grain Steel - 文章详情页

作者：

Li, B. (Li, B..) | Zhao, Y.-Z. (Zhao, Y.-Z..) | Shi, Y.-W. (Shi, Y.-W..) | Tian, Z.-L. (Tian, Z.-L..)

收录：

Scopus PKU CSCD

摘要：

The　microstructure　and　fine　structure　of　weld　fusion　zone　for　high　strength　fine　grain　steel　were　studied.　The　results　indicate　that　the　width　of　the　fusion　zone　is　only　20　-　40　μm　under　PC-MAG　welding　with　different　welding　parameters.　The　microhardness　is　increased　with　the　decreasing　of　heat　input.　The　acicular　ferrite　morphology　at　the　weld　side　is　affected　by　welding　parameter,　and　the　inclusions　are　located　at　the　boundaries　of　ferrite.　There　are　different　morphologies　of　carbide　in　low　bainite,　and　the　distribution　of　carbide　is　affected　by　welding　parameter.

关键词：

Acicular ferrite; Bainite; Carbon steel; Fine grain; Fine structure; Fusion zone; Microstructure

作者机构：

[ 1 ] [Li, B.]Beijing University of Technology, Beijing 100022, China
[ 2 ] [Zhao, Y.-Z.]Beijing University of Technology, Beijing 100022, China
[ 3 ] [Shi, Y.-W.]Beijing University of Technology, Beijing 100022, China
[ 4 ] [Tian, Z.-L.]Ctrl. Iron/Steel Research Institute, Beijing 100081, China

通讯作者信息：

[Li, B.]Beijing University of Technology, Beijing 100022, China

电子邮件地址：

查看成果更多字段

成果类型
所属机构

所有年份指定年份从至