您的检索：
学者姓名：康天放
精炼检索结果：
年份
成果类型
收录类型
来源
综合
合作者
语言
清除所有精炼条件
摘要 ：
制备了金纳米粒子-氧化石墨烯(AuNPs-GO)复合物,采用透射电镜(TEM)和紫外-可见吸收光谱(UV-Vis)对其进行了表征。将此复合物修饰到玻碳电极(GCE)表面,再通过Au—S键将巯基修饰的富含鸟嘌呤的DNA链(T30695)自组装到电极表面的金纳米粒子上。T30695可与Pb~(2+)结合形成稳定的平行G-四链体,此G-四链体再与氯化血红素(Hemin)结合形成具有过氧化物酶活性的DNA酶(DNAzyme),基于此制得Pb~(2+)敏感的DNA酶电化学传感器。形成的DNA酶可催化H_2O_2氧化对苯二酚(HQ),实现电化学信号的放大和Pb~(2+)的高灵敏检测。在优化的实验条件下,在...
关键词 ：
DNA酶 DNA酶 方波伏安法 方波伏安法 铅离子(Ⅱ) 铅离子(Ⅱ) 传感器 传感器
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 杨瑞 , 康天放 , 鲁理平 et al. 基于DNA酶/AuNPs-GO传感器方波伏安法高灵敏检测Pb~(2+) [J]. | 分析化学 , 2021 , 49 (02) : 309-317 . |
| MLA | 杨瑞 et al. "基于DNA酶/AuNPs-GO传感器方波伏安法高灵敏检测Pb~(2+)" . | 分析化学 49 . 02 (2021) : 309-317 . |
| APA | 杨瑞 , 康天放 , 鲁理平 , 叶青 . 基于DNA酶/AuNPs-GO传感器方波伏安法高灵敏检测Pb~(2+) . | 分析化学 , 2021 , 49 (02) , 309-317 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
为了有效去除大气污染物中的CO,使用氧化还原法制备层状锰氧化物MnOx-L,并用离子交换法制备了负载不同质量分数Fe的Fex/MnOx-L催化剂.使用扫描电子显微镜(scanning electron microscope,SEM)、X射线衍射(X-ray diffraction,XRD)技术、比表面积测定(brunauer emmett teller,BET)、热重分析(thermogravimetric analysis,TGA)、氢气程序升温还原(hydrogen temperature-programmed reduction,H2-TPR)、氧气程序升温脱附(oxygen temperature-programmed,O2-TPD)、X射线光电子能谱(X-ray photoelectron spectroscopy,XPS)等技术表征催化剂形貌、结构及性能.层状锰氧化物MnOx-L具有典型的八面体层状结构,Fe负载对催化剂结构影响不大,但对其理化性质产生了影响.Fe负载改变了催化剂的还原性及其表面的m(Fe2+)/m(Fe3+)和m(Oads)/m(Olatt)比例,提高了样品的催化活性.在所有Fex/MnOx-L样品中,Fe5/MnOx-L具有最高的低温还原性、氧移动性,m(Fe2+)/m(Fe3+)及表面吸附氧最高.催化氧化CO反应中,Fe5/MnOx-L具有最佳的催化活性(t50=80℃和t90=150℃),这与Fe和MnOx-L载体之间的相互作用有关.
关键词 ：
催化氧化CO 催化氧化CO 负载量 负载量 还原性 还原性 层状锰氧化物 层状锰氧化物 活性 活性 Fex/MnOx-L Fex/MnOx-L
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 傅之丹 , 付娇丽 , 叶青 et al. MnOx-L负载Fe催化剂的制备及其催化氧化CO性能 [J]. | 北京工业大学学报 , 2020 , 46 (4) : 360-368 . |
| MLA | 傅之丹 et al. "MnOx-L负载Fe催化剂的制备及其催化氧化CO性能" . | 北京工业大学学报 46 . 4 (2020) : 360-368 . |
| APA | 傅之丹 , 付娇丽 , 叶青 , 程水源 , 康天放 . MnOx-L负载Fe催化剂的制备及其催化氧化CO性能 . | 北京工业大学学报 , 2020 , 46 (4) , 360-368 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
随着化石燃料需求的增加,CO2大量排放,温室效应日益严重,目前面临的最大问题是如何经济且高效地捕获CO2.虽然沸石和活性炭等一些传统吸附剂已被广泛应用,但其造价相对较高,因此需要开发廉价且高效的CO2吸附剂.综述了从黏土和废料中开发低成本CO2吸附剂的研究进展,从物理化学方面讨论吸附剂对CO2吸附性能的影响,最后对廉价高效CO2吸附材料进行了展望.
关键词 ：
废料 废料 黏土 黏土 CO2吸附剂 CO2吸附剂
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 吴凯 , 武润平 , 叶青 et al. 低成本二氧化碳吸附剂研究进展 [J]. | 化工新型材料 , 2020 , 48 (6) : 24-28 . |
| MLA | 吴凯 et al. "低成本二氧化碳吸附剂研究进展" . | 化工新型材料 48 . 6 (2020) : 24-28 . |
| APA | 吴凯 , 武润平 , 叶青 , 程水源 , 康天放 . 低成本二氧化碳吸附剂研究进展 . | 化工新型材料 , 2020 , 48 (6) , 24-28 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
甲醛(HCHO)是一种典型的挥发性有机化合物(VOCs).空气中的甲醛主要来源于建筑材料、塑料、水泥和油漆等,长时间暴露于含有甲醛的空气中会对人体健康造成严重危害.因此,消除空气中的甲醛是亟待解决的问题.催化氧化是目前较好的去除甲醛的技术方法之一,它能有效地在较低温度下将甲醛氧化成CO_2和H_2O.通常,负载型贵金属(Au, Pt, Pd和Ag)催化剂具有较好的催化氧化甲醛性能,但高成本和易中毒的特性限制了其应用.负载型过渡金属催化剂具有成本低和催化氧化性能良好等特点,是当前研究的热点.而催化剂活性通常与所用载体及其物理性质相关,如晶体结构、化学组成、表面积和热稳定性等.因此,开发合适的载体...
关键词 ：
挥发性有机化合物 挥发性有机化合物 HCHO氧化 HCHO氧化 负载型过渡金属催化剂 负载型过渡金属催化剂 过渡金属负载 过渡金属负载 钠化海泡石 钠化海泡石
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 董宁 , 叶青 , 陈梦月 et al. 钠化海泡石负载过渡金属催化剂TM/NaSep(TM=Cu,Fe,Ni,Mn,Co)催化氧化甲醛性能（英文） [J]. | Chinese Journal of Catalysis , 2020 , 41 (11) : 1734-1744 . |
| MLA | 董宁 et al. "钠化海泡石负载过渡金属催化剂TM/NaSep(TM=Cu,Fe,Ni,Mn,Co)催化氧化甲醛性能（英文）" . | Chinese Journal of Catalysis 41 . 11 (2020) : 1734-1744 . |
| APA | 董宁 , 叶青 , 陈梦月 , 程水源 , 康天放 , 戴洪兴 . 钠化海泡石负载过渡金属催化剂TM/NaSep(TM=Cu,Fe,Ni,Mn,Co)催化氧化甲醛性能（英文） . | Chinese Journal of Catalysis , 2020 , 41 (11) , 1734-1744 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
The sodium-treated sepiolite (NaSep)-supported rare earth oxide (RE/NaSep; RE = La, Eu, Dy, and Tm) samples were prepared using the rotary evaporation method. Physicochemical properties of these materials were characterized by XRD, SEM, BET, FTIR, XPS, H-2-TPR, NH3-TPD, and in situ DRIFTS, and their catalytic activities for formaldehyde (HCHO) (2000 ppm) oxidation were evaluated. The results show that loading of the rare earth oxide on NaSep improved its catalytic performance. Among all the samples, Eu/NaSep performed the best, and complete HCHO conversion was achieved at a temperature of 150 degrees C and a gas hourly space velocity of 240,000 mL/(g h); a good catalytic activity was still maintained after 45 h of stability test. The catalytic oxidation mechanism of HCHO was studied using the in situ DRIFTS technique. As a result, the effective and stable catalytic performance of the Eu/NaSep sample was mainly due to the presence of hydroxyl groups on the sepiolite surface and the doped rare earth oxides, which contributed to its high performance. HCHO oxidation underwent via the steps of HCHO + O-2 -> HCOO- + OH- -> H2O + CO2. It is concluded that the optimal catalytic activity of Eu/NaSep was associated with the highest O-ads/O-latt atomic ratio, the largest amount of hydroxyl groups, the highest acidity, and the best reducibility. The present work may provide new insights into the application in the removal of high-concentration HCHO over the rare earth oxides supported on natural low-cost clays.
关键词 ：
rare earth oxide rare earth oxide HCHO oxidation HCHO oxidation volatile organic compound volatile organic compound sodium-treated sepiolite sodium-treated sepiolite
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Dong, Ning , Ye, Qing , Chen, Mengyue et al. Catalytic Oxidation of HCHO over the Sodium-Treated Sepiolite-Supported Rare Earth (La, Eu, Dy, and Tm) Oxide Catalysts [J]. | CATALYSTS , 2020 , 10 (3) . |
| MLA | Dong, Ning et al. "Catalytic Oxidation of HCHO over the Sodium-Treated Sepiolite-Supported Rare Earth (La, Eu, Dy, and Tm) Oxide Catalysts" . | CATALYSTS 10 . 3 (2020) . |
| APA | Dong, Ning , Ye, Qing , Chen, Mengyue , Cheng, Shuiyuan , Kang, Tianfang , Dai, Hongxing . Catalytic Oxidation of HCHO over the Sodium-Treated Sepiolite-Supported Rare Earth (La, Eu, Dy, and Tm) Oxide Catalysts . | CATALYSTS , 2020 , 10 (3) . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
甲醛(HCHO)是一种典型的挥发性有机化合物(VOCs),空气中的甲醛主要来源于建筑材料、塑料、水泥和油漆等,长时间暴露于含有甲醛的空气中会对人体健康造成严重危害.因此,消除空气中的甲醛是亟待解决的问题.催化氧化是目前较好的去除甲醛的技术方法之一,它能有效地在较低温度下将甲醛氧化成CO2和H2O.通常,负载型贵金属(Au.Pt,Pd和Ag)催化剂具有较好的催化氧化甲醛性能,但高成本和易中毒的特性限制了其应用.负载型过渡金属催化剂具有成本低和催化氧化性能良好等特点,是当前研究的热点.而催化剂活性通常与所用载体及其物理性质相关,如晶体结构、化学组成、表面积和热稳定性等.因此,开发合适的载体,提高过渡金属催化剂的催化性能具有重要意义.海泡石是具有特定官能团和纤维状结构的天然粘土矿物,相比其他类型的硅酸盐粘土,其具有较高的吸附性能和较好的水热稳定性.本文通过浸渍法制备了钠化海泡石(NaSep)负载过渡金属催化剂TM/NaSep GM=Cu,Fe,Ni,Mn,Co),研究了其物理化学性质,考察了其催化氧化甲醛(0.2%)性能.XRD与SEM结果表明,负载过渡金属不影响海泡石原矿的物理结构.比-TPR,NHj-TPD和XPS结果表明,负载过渡金属对催化剂氧化还原性能、酸性和吸附氧能力影响较大.TM/NaSep总酸度与吸附氧能力(Oads/(Olat,+OoH))按以下顺序递减:Cu/NaSep>Fe/NaSep>Mn/NaSep>Ni/NaSep>Co/NaSep.这与催化剂催化氧化甲醛活性顺序一致.在所有样品中,Cu/NaSep表现出最佳的催化氧化甲醛活性,在100(GHSV=240000 mL/(g·h))可以完全氧化甲醛.42 h稳定性测试表明其具有良好的稳定性.综合研究表明,Cu/NaSep催化剂优良的催化活性与其良好的低温还原性、较高的酸度和吸附氧能力等因素有关.原位DRIFTS研究Cu/NaSep催化剂催化氧化甲醛机理表明,首先,甲醛吸附在催化剂表面,然后表面的吸附氧物种将其氧化成
关键词 ：
过渡金属负载 过渡金属负载 HCHO氧化 HCHO氧化 钠化海泡石 钠化海泡石 挥发性有机化合物 挥发性有机化合物 负载型过渡金属催化剂 负载型过渡金属催化剂
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 董宁 , 叶青 , 陈梦月 et al. 钠化海泡石负载过渡金属催化剂TM/NaSep(TM=Cu,Fe,Ni,Mn,Co)催化氧化甲醛性能 [J]. | 催化学报 , 2020 , 41 (11) : 1734-1744 . |
| MLA | 董宁 et al. "钠化海泡石负载过渡金属催化剂TM/NaSep(TM=Cu,Fe,Ni,Mn,Co)催化氧化甲醛性能" . | 催化学报 41 . 11 (2020) : 1734-1744 . |
| APA | 董宁 , 叶青 , 陈梦月 , 程水源 , 康天放 , 戴洪兴 . 钠化海泡石负载过渡金属催化剂TM/NaSep(TM=Cu,Fe,Ni,Mn,Co)催化氧化甲醛性能 . | 催化学报 , 2020 , 41 (11) , 1734-1744 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
Sodium-treated sepiolite (NaSep)-supported transition metal catalysts (TM/NaSep; TM = Cu, Fe, Ni, Mn, and Co) were synthesized via a rotary evaporation method. Physicochemical properties of the as-synthesized samples were characterized by means of various techniques, and their catalytic activities for HCHO (0.2%) oxidation were evaluated. Among the samples, Cu/NaSep exhibited superior performance, and complete HCHO conversion was achieved at 100 degrees C (GHSV = 240000 mL/(g.h)). Additionally, the sample retained good catalytic activity during a 42 h stability test. A number of factors, including elevated acidity, the abundance of oxygen species, and favorable low-temperature reducibility, were responsible for the excellent catalytic activity of Cu/NaSep. According to the results of the in-situ DRIFTS characterization, the HCHO oxidation mechanism was as follows: (i) HCHO was rapidly decomposed into dioxymethylene (DOM) species on the Cu/NaSep surface; (ii) DOM was then immediately converted to formate species; (iii) the resultant formate species were further oxidized to carbonates; (iv) the carbonate species were eventually converted to CO2 and H2O. (c) 2020, Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.
关键词 ：
Sodium-treated sepiolite Sodium-treated sepiolite HCHO oxidation HCHO oxidation Supported transition metal catalyst Supported transition metal catalyst Transition metal loading Transition metal loading Volatile organic compound Volatile organic compound
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Dong, Ning , Ye, Qing , Chen, Mengyue et al. Sodium-treated sepiolite-supported transition metal (Cu, Fe, Ni, Mn, or Co) catalysts for HCHO oxidation [J]. | CHINESE JOURNAL OF CATALYSIS , 2020 , 41 (11) : 1734-1744 . |
| MLA | Dong, Ning et al. "Sodium-treated sepiolite-supported transition metal (Cu, Fe, Ni, Mn, or Co) catalysts for HCHO oxidation" . | CHINESE JOURNAL OF CATALYSIS 41 . 11 (2020) : 1734-1744 . |
| APA | Dong, Ning , Ye, Qing , Chen, Mengyue , Cheng, Shuiyuan , Kang, Tianfang , Dai, Hongxing . Sodium-treated sepiolite-supported transition metal (Cu, Fe, Ni, Mn, or Co) catalysts for HCHO oxidation . | CHINESE JOURNAL OF CATALYSIS , 2020 , 41 (11) , 1734-1744 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
A molecularly imprinted magnetic sensor with electmluminescent tags (MIP-ECL sensor) was developed for ultrasensing diethylstilbestrol (DES). A strategy is exploited to enhance ECL emission of the [Ru(bpy)(3)](2+)-tripropyl amine (TPrA) system by CdTe@ZnS quantum-dots (QDs) through energy transfer. Magnetically molecularly imprinted nanoparticles (MMIPs NPs) based on Fe3O4@SiO2 carriers are artificial, easily reproducible, and could replace easily inactivated first antibodies for capturing more DES molecules. Functionalized bio-conjugates of single antibody-CdTe@ZnS (Ab-CdTe@ZnS) are for the first time loaded on signal labels of Ru(bpy) +-doped silica nanocomposites (Ru@SiO2) for signal amplification. The final bio-conjugated signal probes are denoted as Ab-DES/CdTe@ZnS-Ru@SiO2. MMIPs beads that have captured antigens are bio-conjugated with antibodylabeled luminescent probes by specific immunoreactive reaction, and then the luminescent immunocomplex generates ECL signal on the magnetic electrode. The logarithm of ECL intensities depend linearly on the logarithm of DES concentrations in the range from 4.8 x 10(-)(4) to 36.0 nM with a detection limit of 0.025 pM. This novel assay is much more sensitive than other MIP sensors, and achieves lower cost and more enhanced stability than other immunosensors. The sensor is significantly potential and has been applied to DES detection in actual environment.
关键词 ：
[Ru(bpy)(3)](2+)-doped silica [Ru(bpy)(3)](2+)-doped silica Diethylstilbestrol Diethylstilbestrol Core-shell QDs Core-shell QDs Probe-mode ECL sensor Probe-mode ECL sensor Single antibody sandwich-type Single antibody sandwich-type Magnetically imprinted nanoparticles Magnetically imprinted nanoparticles
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Zhao, Wen-Rui , Xu, Yao-Hua , Kang, Tian-Fang et al. Sandwich magnetically imprinted immunosensor for electrochemiluminescence ultrasensing diethylstilbestrol based on enhanced luminescence of Ru@SiO2 by CdTe@ZnS quantum dots [J]. | BIOSENSORS & BIOELECTRONICS , 2020 , 155 . |
| MLA | Zhao, Wen-Rui et al. "Sandwich magnetically imprinted immunosensor for electrochemiluminescence ultrasensing diethylstilbestrol based on enhanced luminescence of Ru@SiO2 by CdTe@ZnS quantum dots" . | BIOSENSORS & BIOELECTRONICS 155 (2020) . |
| APA | Zhao, Wen-Rui , Xu, Yao-Hua , Kang, Tian-Fang , Zhang, Xiao , Liu, Hao , Ming, An-Jie et al. Sandwich magnetically imprinted immunosensor for electrochemiluminescence ultrasensing diethylstilbestrol based on enhanced luminescence of Ru@SiO2 by CdTe@ZnS quantum dots . | BIOSENSORS & BIOELECTRONICS , 2020 , 155 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
In this paper, CdS quantum dots (QDs) were synthesized. Positively charged poly(diallyldimethylammonium chloride) (PDDA) and negatively charged CdS quantum dots were sequentially adsorbed on the surface of graphene oxide (GO). The nano-luminescent materials GO-QDs were prepared and characterized by UV-Vis absorption spectroscopy, fluorescence spectroscopy and transmission electron microscopy. The GO-QDs were then modified on the surface of glassy carbon electrode (GCE). Chloramphenicol aptamer (apt) of 5'-end modified biotin hybridized with the aptamer complementary strand (cDNA) of 5'-end modified amino group into double-stranded DNA (dsDNA). The double-stranded DNA was bonded onto the surface of GO-QDs modified electrode. When the electrode was incubated with streptavidin - labeled horseradish peroxidase (SA-HRP), the biotin modified at the end of the chloramphenicol aptatner can specifically bind directly to the streptavidin labeled HRP. Therefore, HRP was bonded to the surface of the electrode. Hydrogen peroxide was used as the co-reactant of the QDs. HRP can thereby consume hydrogen peroxide and can weaken the electrochemiluminescence intensity. Chloramphenicol in solution can specifically bind to the aptamer to form a composite and to unwind the dsDNA. Then the composite was detached from the surface of the electrode. HRP also left the electrode surface along with the aptamer, so that the electrochemiluminescence signal was significantly enhanced. The electrochemiluminescence intensity of the sensor showed a linear correlation with the logarithm of chloramphenicol concentration. The linear range was 1.0 x 10(-12)-1.0 x 10(-7) M, the detection limit is 0.5 pM. The reproducibility, stability and specificity of the sensor were also studied. The sensor was used for the determination of chloramphenicol in samples and satisfactory results were obtained. (C) 2020 Elsevier B.V. All rights reserved.
关键词 ：
Chloramphenicol Chloramphenicol Aptamer sensor Aptamer sensor Quantum dots Quantum dots Electrochemiluminescence Electrochemiluminescence
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | He, Zhang-Jin , Kang, Tian-Fang , Lu, Li-Ping et al. An electrochemiluminescence aptamer sensor for chloramphenicol based on GO-QDs nanocomposites and enzyme-linked aptamers [J]. | JOURNAL OF ELECTROANALYTICAL CHEMISTRY , 2020 , 860 . |
| MLA | He, Zhang-Jin et al. "An electrochemiluminescence aptamer sensor for chloramphenicol based on GO-QDs nanocomposites and enzyme-linked aptamers" . | JOURNAL OF ELECTROANALYTICAL CHEMISTRY 860 (2020) . |
| APA | He, Zhang-Jin , Kang, Tian-Fang , Lu, Li-Ping , Cheng, Shui-Yuan . An electrochemiluminescence aptamer sensor for chloramphenicol based on GO-QDs nanocomposites and enzyme-linked aptamers . | JOURNAL OF ELECTROANALYTICAL CHEMISTRY , 2020 , 860 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
A novel molecularly imprinted electrochemiluminescence (MIP-ECL) sensor was fabricated for diethylstilbestrol (DES), which exploited the strategy of specific identification by molecularly imprinted polymers (MIPs) instead of expensive biomolecules. Core-shell quantum-dots (QDs) of CdTe@ZnS were utilized to enhance ECL emission. The sensor was assembled as a solid-state electrode by immobilizing CdTe@ZnS/reduced-graphene oxide (r-GO) composite on a glassy carbon electrode (GCE) surface, and then being covered with MIPs film with specific cavities. The fabricated sensor (denoted as MIP/CdTe@ZnS/r-GO/GCE) was based on the obstruction of ECL signals by DES molecules enriched on MIP film. The ECL intensity of the QDs-K2S2O8 system was reduced when the DES molecules were selectively rebound onto the MIP film by molecularly imprinted solid phase extraction (MISPE). Accordingly, the logarithm of the quenched ECL intensity versus the logarithm of the DES concentration was in a good linear relationship over a wide range from 1.8 x 10(-3) to 25.0 nmol/L with the limit of detection (LOD) of 0.25 pmol/L (S/N = 3). The sensor also exhibits excellent selectivity with fast response and good accuracy. Lake water and milk samples were assayed by this sensor, and the recoveries ranging from 92.2%-108.3% were obtained.
关键词 ：
Electrochemiluminescence sensor Electrochemiluminescence sensor Molecularly imprinted film Molecularly imprinted film Diethylstilbestrol Diethylstilbestrol Solid-state electrode Solid-state electrode Solid phase extraction Solid phase extraction CdTe@ZnS quantum-dots CdTe@ZnS quantum-dots
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Zhao, Wen-Rui , Kang, Tian-Fang , Xu, Yao-Hua et al. Electrochemiluminescence solid-state imprinted sensor based on graphene/CdTe@ZnS quantum dots as luminescent probes for low-cost ultrasensing of diethylstilbestrol [J]. | SENSORS AND ACTUATORS B-CHEMICAL , 2020 , 306 . |
| MLA | Zhao, Wen-Rui et al. "Electrochemiluminescence solid-state imprinted sensor based on graphene/CdTe@ZnS quantum dots as luminescent probes for low-cost ultrasensing of diethylstilbestrol" . | SENSORS AND ACTUATORS B-CHEMICAL 306 (2020) . |
| APA | Zhao, Wen-Rui , Kang, Tian-Fang , Xu, Yao-Hua , Zhang, Xiao , Liu, Hao , Ming, An-Jie et al. Electrochemiluminescence solid-state imprinted sensor based on graphene/CdTe@ZnS quantum dots as luminescent probes for low-cost ultrasensing of diethylstilbestrol . | SENSORS AND ACTUATORS B-CHEMICAL , 2020 , 306 . |
| 导入链接 | NoteExpress RIS BibTex |
导出
| 数据： |
选中 到 |
| 格式： |
