您的检索：
学者姓名：索红莉
精炼检索结果：
年份
成果类型
收录类型
来源
综合
曾用名
合作者
语言
清除所有精炼条件
摘要 ：
Ag元素对Ni-7at.%W合金基带织构形成的影响
关键词 ：
Ni7W合金基带 Ni7W合金基带 涂层导体 涂层导体 Ag元素 Ag元素 织构 织构
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 高忙忙 , 苏圣尧 , 张方圆 et al. Ag元素对Ni-7at.%W合金基带织构形成的影响 [J]. | 高忙忙 , 2021 , 47 (1) : 5-10 . |
| MLA | 高忙忙 et al. "Ag元素对Ni-7at.%W合金基带织构形成的影响" . | 高忙忙 47 . 1 (2021) : 5-10 . |
| APA | 高忙忙 , 苏圣尧 , 张方圆 , 赵旭 , 马麟 , 索红莉 et al. Ag元素对Ni-7at.%W合金基带织构形成的影响 . | 高忙忙 , 2021 , 47 (1) , 5-10 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
MgB_2超导体具有优良的超导电性能,受到了极大的关注。用不同方法制备的MgB_2超导体,其超导电性能也不尽相同。常压扩散法使用的设备简单且操作方便,制备出的MgB_2超导电性能也较为优越。本文系统地介绍了属于扩散法的渗透生长法、渗透胶囊法、液相Mg扩散法和气相扩散法并对其优缺点进行了比较,重点介绍了液相Mg扩散法在超导电缆、电磁屏蔽和磁悬浮等方面的应用。根据对各种合成方法的比较及其相关的应用,展望了扩散合成法的发展趋势。
关键词 ：
评述 评述 特种功能无机非金属材料 特种功能无机非金属材料 扩散合成法 扩散合成法 强电应用 强电应用 MgB_2超导体 MgB_2超导体
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 赵万里 , 索红莉 , 刘敏 et al. 用扩散法制备MgB_2块材的研究进展 [J]. | 材料研究学报 , 2021 , 35 (06) : 411-418 . |
| MLA | 赵万里 et al. "用扩散法制备MgB_2块材的研究进展" . | 材料研究学报 35 . 06 (2021) : 411-418 . |
| APA | 赵万里 , 索红莉 , 刘敏 , 马麟 , 戴银明 , 张子立 . 用扩散法制备MgB_2块材的研究进展 . | 材料研究学报 , 2021 , 35 (06) , 411-418 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
Ag元素能够使Ni和Ni-5at.%W合金基带中的晶粒形貌呈细长状,从而提升超导层电流的传输能力.研究了Ag在高W含量的NiW合金基带(>5at.%W)中对织构的影响机制,为后续调控晶粒形貌打下基础.研究表明:Ag使基带中S取向的体积分数降低,进而影响了再结晶后基带中立方晶体型织构的形成.通过在轧制变形量为90%时引入550℃保温2 h的中间热处理,可以使冷轧基带的形变因子R由0.72提升至1.05,从而增加铜型织构的体积分数,并使得基带中形变后的立方晶体的取向增大65%.最终,经过再结晶热处理获得了表面立方晶体型织构的体积分数为96.8%的Ni-7at.%W-0.01at.%Ag合金基带.
关键词 ：
Ag元素 Ag元素 Ni7W合金基带 Ni7W合金基带 涂层导体 涂层导体 织构 织构
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 高忙忙 , 苏圣尧 , 张方圆 et al. Ag元素对Ni-7at.%W合金基带织构形成的影响 [J]. | 兰州理工大学学报 , 2021 , 47 (01) : 5-10 . |
| MLA | 高忙忙 et al. "Ag元素对Ni-7at.%W合金基带织构形成的影响" . | 兰州理工大学学报 47 . 01 (2021) : 5-10 . |
| APA | 高忙忙 , 苏圣尧 , 张方圆 , 赵旭 , 马麟 , 索红莉 . Ag元素对Ni-7at.%W合金基带织构形成的影响 . | 兰州理工大学学报 , 2021 , 47 (01) , 5-10 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
为了解决哈氏(Hastelloy C-276)合金基带表面粗糙度过大造成不平整的问题,采用溶液沉积平整化技术在哈氏合金表面制备Y_2O_3非晶薄膜来满足使用要求.通过研究前驱液的稳定性和浓度、热处理温度和涂覆次数对表面粗糙度的影响规律,同时采用高低浓度相结合的方法涂覆非晶薄膜来提高涂覆效率,结果表明:先使用高浓度0.40 mol/L涂覆6次,再使用低浓度0.10 mol/L涂覆6次,获得了表面平均粗糙度R_a值为0.65 nm(5μm×5μm)高表面质量的带材,涂覆效率相比使用单一溶度提高了近30%.前驱液浓度越高,溶液粒径越大,前期涂覆效果更佳,后改用低浓度粒径小的前驱液进行表面精修,可以大...
关键词 ：
原子力显微镜 原子力显微镜 哈氏合金 哈氏合金 溶液沉积平整化 溶液沉积平整化 溶液沉积法 溶液沉积法 表面粗糙度 表面粗糙度 非晶Y_2O_3薄膜 非晶Y_2O_3薄膜
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | 王毅 , 闻家成 , 郝善鹏 et al. SDP法制备非晶Y_2O_3薄膜用于哈氏(Hastelloy C-276)合金基带表面精修 [J]. | 北京工业大学学报 , 2021 , 47 (09) : 1029-1035 . |
| MLA | 王毅 et al. "SDP法制备非晶Y_2O_3薄膜用于哈氏(Hastelloy C-276)合金基带表面精修" . | 北京工业大学学报 47 . 09 (2021) : 1029-1035 . |
| APA | 王毅 , 闻家成 , 郝善鹏 , 李家志 , 索红莉 . SDP法制备非晶Y_2O_3薄膜用于哈氏(Hastelloy C-276)合金基带表面精修 . | 北京工业大学学报 , 2021 , 47 (09) , 1029-1035 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
The microstructure and texture evolution of Ni-5 at%W (Ni5W) alloy substrates were investigated by in situ tensile testing along the rolling direction (RD), transverse direction (TD), and at 45° to the RD (45°-RD), as well as by electron backscatter diffraction characterization. The tensile stress direction had a significant influence on the texture evolution. The cubic texture in the Ni-5 at%W alloy exhibited severe degradation when the tensile angle was 45°-RD. In contrast, the cubic texture was relatively stable under high deformation along the RD or TD. It was found that the slip line system in the 45°-RD specimen was the key to the contrasting behavior. The effect of the tensile testing angle on the cubic texture evolution for Ni–W substrates was investigated, and the corresponding effect on the superconducting properties of coated materials was studied.
关键词 ：
coated conductor coated conductor cubic texture cubic texture electron backscatter diffraction electron backscatter diffraction plastic deformation plastic deformation
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Wu Xinyu , Suo Hongli , Li Jiazhi et al. In Situ EBSD Study on the Microstructural Transformation of the Ni5W Substrate for Coated Conductors. [J]. | Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada , 2021 , 27 (1) : 36-43 . |
| MLA | Wu Xinyu et al. "In Situ EBSD Study on the Microstructural Transformation of the Ni5W Substrate for Coated Conductors." . | Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 27 . 1 (2021) : 36-43 . |
| APA | Wu Xinyu , Suo Hongli , Li Jiazhi , Ji Yaotang , Ma Lin , Liu Min et al. In Situ EBSD Study on the Microstructural Transformation of the Ni5W Substrate for Coated Conductors. . | Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada , 2021 , 27 (1) , 36-43 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
Ni-8 at % W alloy ingots were prepared using a spark plasma sintering technique. The evolution of the microstructure, cold-rolling texture, and recrystallization texture of the Ni8W alloy were studied using X-ray diffractometry and electron backscatter diffractometry techniques. The results revealed the strong influence of the initial grain size on the cube texture formation of the annealed substrates. A strong cube texture was obtained in substrates with finer initial grains. A brass-type rolling texture was formed in the final cold-rolled tape after cold rolling. The cold-rolled tape mainly consisted of S, brass, and a weak {110} < 118 & rang; texture. The cube orientation nuclei did not have a nucleation advantage at the early stage of recrystallization. Large-scale twinning was exhibited in the cold-rolled microstructure at a high annealing temperature. The cube orientation and RD (rolling direction)-cube orientation textures, which transformed from the cube twin orientation and random orientation grains, were grown immediately at almost the same rate. The cube orientation and RD-cube orientation grains grew faster than other orientation grains throughout the whole grain growth process. Finally, a strong cube texture was obtained for the Ni-8 at % W substrate after an optimized annealing process.
关键词 ：
cube texture cube texture Ni8W substrate Ni8W substrate recrystallization annealing recrystallization annealing rolling rolling spark plasma sintering spark plasma sintering
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Ji, Yaotang , Suo, Hongli , Meng, Yichen et al. A Study about Ni-8 at % W Alloy Substrates Used for REBCO Coated Conductors [J]. | PHYSICS OF METALS AND METALLOGRAPHY , 2021 . |
| MLA | Ji, Yaotang et al. "A Study about Ni-8 at % W Alloy Substrates Used for REBCO Coated Conductors" . | PHYSICS OF METALS AND METALLOGRAPHY (2021) . |
| APA | Ji, Yaotang , Suo, Hongli , Meng, Yichen , Wu, Xinyu , Shaheen, Kausar , Ma, Lin et al. A Study about Ni-8 at % W Alloy Substrates Used for REBCO Coated Conductors . | PHYSICS OF METALS AND METALLOGRAPHY , 2021 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
We report a novel doping strategy for YBa2Cu3O7-x (YBCO) superconducting films by using a positive mismatch, Ba2YNbO6 (BYNO), and a negative mismatch, LaAlO3 (LAO), simultaneously. Double doping can significantly reduce the c-strain in the YBCO film by canceling the strain between the two dopants. By systematically optimizing the doping amount of both BYNO and LAO, it was found that BYNO and LAO do not act equally. The microstructure and distribution of both BYNO and LAO were investigated with magneto-optic microscopy and scanning electron microscopy. The effect of BYNO and LAO on pinning was confirmed. The results of this study will help select appropriate positive mismatch and negative mismatch dopants, which is fundamental to the design and fabrication of pinning centers to fit different application scenarios. © 2020 Elsevier Ltd
关键词 ：
Aluminum compounds Aluminum compounds Barium compounds Barium compounds Copper compounds Copper compounds Lanthanum compounds Lanthanum compounds Niobium compounds Niobium compounds Scanning electron microscopy Scanning electron microscopy Semiconductor doping Semiconductor doping Superconducting films Superconducting films Yttrium barium copper oxides Yttrium barium copper oxides
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Xu, Yan , Suo, Hongli , Qureishy, Thomas et al. Systematic research on the effect of both positive and negative mismatch dopants in double-doped YBCO superconducting films [J]. | Journal of the European Ceramic Society , 2021 , 41 (1) : 480-487 . |
| MLA | Xu, Yan et al. "Systematic research on the effect of both positive and negative mismatch dopants in double-doped YBCO superconducting films" . | Journal of the European Ceramic Society 41 . 1 (2021) : 480-487 . |
| APA | Xu, Yan , Suo, Hongli , Qureishy, Thomas , Grivel, Jean-Claude , Mikheenko, Pavlo , Liu, Min et al. Systematic research on the effect of both positive and negative mismatch dopants in double-doped YBCO superconducting films . | Journal of the European Ceramic Society , 2021 , 41 (1) , 480-487 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
Among all the preparation methods, electrochemical exfoliation of graphite in neutral aqueous solution to prepare high-quality graphene is a hot research topic due to many advantages, such as high efficiency, environmental friendly, fewer defects, and convenient operation with simple equipment. In this work, the graphene was prepared by pre-intercalation assisted electrochemical exfoliation of graphite foil, in which one pre-intercalation stage was performed at the low voltage to moderately enlarge the interlayer distance of graphite foil, and then graphite electrode was electrochemically exfoliated to produce graphene nanosheets in an aqueous inorganic salt solution of (NH4)2SO4. Through comparing two pretreatment methods of graphite foil (pre-expansion with liquid nitrogen and pre-intercalation by electrochemical intercalation), the electrochemical pre-intercalation process was confirmed to avoid the serious loss of the graphite electrode during the liquid nitrogen pretreatment and facilitate electrochemical exfoliation. Meanwhile, the optimum parameters of pre-intercalation were determined. Subsequently, the effect of applied voltage on the quality of obtained graphene (such as the number of layers, defects, size, composition) during the exfoliation stage was investigated systematically, and especially the effect of applied voltage on the quality and yield of graphene was discussed in detail. The graphene nanosheets with a small number of layers (60% is less than 5 layers) were obtained through two stages of electrochemical pre-intercalation and exfoliation. The structure, morphology, and composition of the graphene were analyzed by using the XRD, SEM, TEM, AFM, and XPS. © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.
关键词 ：
Defects Defects Electrochemical electrodes Electrochemical electrodes Exfoliation (materials science) Exfoliation (materials science) Graphene Graphene Graphite Graphite Graphite electrodes Graphite electrodes Liquefied gases Liquefied gases Liquid nitrogen Liquid nitrogen Nanosheets Nanosheets Nitrogen compounds Nitrogen compounds
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Pei, Junfeng , Zhang, Teng , Suo, Hongli . Graphene preparation and process parameters by pre-intercalation assisted electrochemical exfoliation of graphite [J]. | Journal of Solid State Electrochemistry , 2021 , 25 (4) : 1245-1257 . |
| MLA | Pei, Junfeng et al. "Graphene preparation and process parameters by pre-intercalation assisted electrochemical exfoliation of graphite" . | Journal of Solid State Electrochemistry 25 . 4 (2021) : 1245-1257 . |
| APA | Pei, Junfeng , Zhang, Teng , Suo, Hongli . Graphene preparation and process parameters by pre-intercalation assisted electrochemical exfoliation of graphite . | Journal of Solid State Electrochemistry , 2021 , 25 (4) , 1245-1257 . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
Using an environmentally friendly acid-alcohol system solution for electrochemical polishing of 3D printed titanium alloy, a typical U-I polarization curve was obtained, and explained the mechanism of electrochemical polishing. In this paper, the influence of electrochemical polishing factors (electrolyte temperature, polishing distance, and polishing time) on the surface roughness of Ti-6Al-4V (TC4) was studied, and optimized the process parameters to obtain a surface roughness of 0.3 mu m (1 mm x 1 mm). Electrochemical polishing can reach the level of mechanical grinding and polishing, meeting the requirements for subsequent assembly and use.
关键词 ：
atomic force microscope atomic force microscope electrochemical polishing electrochemical polishing surface roughness surface roughness titanium alloy titanium alloy
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Wang, Shan-Fei , Wang, Yi , Wen, Jia-Cheng et al. Study on electrochemical polishing of TC4 alloy [J]. | MATERIALS RESEARCH EXPRESS , 2021 , 8 (10) . |
| MLA | Wang, Shan-Fei et al. "Study on electrochemical polishing of TC4 alloy" . | MATERIALS RESEARCH EXPRESS 8 . 10 (2021) . |
| APA | Wang, Shan-Fei , Wang, Yi , Wen, Jia-Cheng , Suo, Hong-Li , Liu, Zhuang-Zhuang , Suo, Wen-hua et al. Study on electrochemical polishing of TC4 alloy . | MATERIALS RESEARCH EXPRESS , 2021 , 8 (10) . |
| 导入链接 | NoteExpress RIS BibTex |
摘要 ：
Ultra-fast growth (up to 100 nm s(-1)) of high temperature superconducting film was demonstrated by using an advanced pulsed laser deposition technique. Highly textured EuBa2Cu3O7-delta (EuBCO) film with 8 mol.% of BaHfO3 (BHO) was deposited on the IBAD-based Hastelloy substrates. Structure characterizations reveal formation of high density of BHO nanocolumns with diameter of similar to 5 nm in the film, which is well beyond the expectation. Comparison study on different amount of BHO in EBCO film confirmed that nanocolumn formation strongly depends on the dopant level. The epitaxial growth process of BHO is dominated by ultra-fast self-assembly associated with enhanced diffusion of high flux element and liquid phase. Due to the correlated pinning landscape, a pronounced broad peak appears at B//c in the J(c)() curves at 30 K 5 T, while a strong pinning force of about 900 GN m(-3) at 4.2 K, 10 T (B//c) are achieved.
关键词 ：
defect engineering defect engineering diffusion diffusion high-temperature superconductor high-temperature superconductor pulse laser deposition pulse laser deposition
引用：
复制并粘贴一种已设定好的引用格式，或利用其中一个链接导入到文献管理软件中。
| GB/T 7714 | Wu, Yue , Jiang, Guangyu , Zhu, Jiamin et al. Ultra-fast growth (up to 100 nm s(-1)) of heavily doped EuBa2Cu3O7 film with highly aligned BaHfO3 nanocolumn structure [J]. | SUPERCONDUCTOR SCIENCE & TECHNOLOGY , 2021 , 34 (5) . |
| MLA | Wu, Yue et al. "Ultra-fast growth (up to 100 nm s(-1)) of heavily doped EuBa2Cu3O7 film with highly aligned BaHfO3 nanocolumn structure" . | SUPERCONDUCTOR SCIENCE & TECHNOLOGY 34 . 5 (2021) . |
| APA | Wu, Yue , Jiang, Guangyu , Zhu, Jiamin , Wu, Donghong , Quan, Xueling , Shi, Jiangtao et al. Ultra-fast growth (up to 100 nm s(-1)) of heavily doped EuBa2Cu3O7 film with highly aligned BaHfO3 nanocolumn structure . | SUPERCONDUCTOR SCIENCE & TECHNOLOGY , 2021 , 34 (5) . |
| 导入链接 | NoteExpress RIS BibTex |
导出
| 数据： |
选中 到 |
| 格式： |
